QL-600S Lathe
- Specifications
- Standard Accessories
- Optional Accessories
Specification:
| ITEM | QL-600S (QL-8) |
|||
|---|---|---|---|---|
Standard |
C-axis |
|||
| Capacity | Swing over bed | Ø600 | ||
| Swing over saddle | Ø400 | |||
| Distance between center | STD: 640 (A2-6) OPT: 595 (A2-8) |
|||
| Max. machining dia. | Ø360 | Ø300 | ||
| Max. machining length | STD: 470 (A2-6) OPT: 455 (A2-8) |
|||
| Slant angle of bed | 30˚ | |||
| Travel range | X-axis | 215 (180+35) | 225 (150+75) | |
| Z-axis | 8" :500 / 10" :500 | |||
| C-axis | 360º ( 0.001º ) | |||
| Spindle | Spindle speeds (rpm) | STD: 50~4900 (A2-6) OPT: 50~3500 (A2-8) |
||
| Spindle nose | STD: A2-6 ; OPT: A2-8 | |||
| Spindle bore dia. | STD: Ø62 (A2-6) ; OPT: Ø86 (A2-8) | |||
| Front bearing dia. | STD: Ø100 (A2-6) ; OPT: Ø120 (A2-8) | |||
| Bar capacity | STD: 52 ; OPT: 75 | |||
| Chuck diameter | STD: Ø8" ; OPT: Ø10" | |||
| Turret | Type | STD: Hydraulic OPT: Servo |
VDI | Live-tooling |
| Stations | STD: 12 ; OPT: 10 | STD:12 ; OPT:8 | ||
| Model | LS-200SV LS-200 |
TBMA200 | ||
| Square tool shank | 25 | |||
| Boring bar shank diameter | Ø40 | |||
| Indexing time (0~180 °) (sec) | 2.1/0.87 | 1.5 | ||
| Live-tool | Spindle speeds (rpm) | 50~4000 | ||
| Feedrate | Rapid traverse (M/min) | X:36, Z:36 | ||
Tailstock |
Quill diameter | Ø85 | ||
| Tapered bore type | MT-4 | |||
| Quill travel | 80 | |||
| Motors | Main spindle (kW) | STD:α12/7000i 11/15 OPT:α15/7000i 15/18.5 |
||
| Sub-spindle(kW) | ||||
| Live-tool (kW) | α 3 (3.7/5.5) | |||
| X/Z-axis servo motor (kW) | X:α 12 3.0 ; Z:α 12 3.0 | |||
| Hydraulic oil pump (kW) | 1.5 | |||
| Chip conveyor (kW) | 0.2 | |||
| Coolant pump (kW) | 0.8 | |||
| Aaauracy | Positioning (mm) | ±0.004 | ||
| Repeatability (mm) | ±0.003 | |||
| Power | Requirement (KVA) | 26 | ||
| Machine size | Height (mm) | 1845 | ||
| Floor space (L x W) | 2300 × 1950 | |||
| Packing (w/conveyor) | 3700 x 2270 x 2140 | |||
| Net weight (w/conveyor) (kgs) | 4870 | |||
| Gross weight (w/conveyor) (kgs) | 5120 | |||
